About Oai Integration - Panasonic PanaVOICE system Technician Manual

Technician 3 Guide
Installing PanaVOKE with an OAI Integration Z-21
About OAI Integration
The Panasonic DBS OAI (Open Application
Interface) Integration Package may be used
with two Panasonic telephone systems:
l
Panasonic Digital Business System (DBS), equipped with a CPC-AII, CPC-B card
Version 8.1 or higher, or a CPC-EXVersion 1.1 or higher, an DEC card, and an API
card
l
Panasonic Digital Business System 824 (DBS 824), equipped with a CPC-M card
Version 2.1 or higher; and an API card
Most of the installation procedures for the OAI Integration Package are identical for
both telephone systems. Only steps described
in Preparing the Panasonic DBSare
significantly different for each type of telephone system. The differences are clearly
noted.
Note
Throughout
this section of the Technician's Guide, the term Panasonic
DBS
will refer to both telephone systems unless explicitly stated otherwise.
This section of the Technician's Guide describes
how to install the OAI Integration
Package. It is designed to be used with thesystem
Manager's Guide and other sections
in
the Technician's Guide. The material in this section assumes you are familiar with the
Panasonic DBS telephone system's features and configuration.
Integration Overview describes
the integration, the steps to take before installa-
tion, and the hardware required.
Preparing the Panasonic DBS guides you through installing telephone
hardware
and programming the telephone system.
Preparing the Voice
Messaging
System
details the steps for configuring the voice
mail software.
Muiibox Builder describes
how to use the feature that adds subscriber mailboxes
based on information programmed in the telephone system.
Testing the integration covers how to test the integration.
Training Subscribers describes
what subscribers should know about using the
integrated systems.
Troubleshooting gives advice on locating and solving problems that may occur in
the integration.