Panasonic Dbs System Programming; Station Information - Panasonic PanaVOICE system Technician Manual

242 Installing PanaVOKE with an OAiIntemztion
PanaVOKE2.0
Panasonic DES System Programming
Check that you have programmed the Panasonic DBS for:
l
Station information
l
Special telephone system programming
Station lnfofmation
Check that each telephone system port is programmed to include the extension
number and the name. Mailbox Builder uses this station information to set up default
subscriber
voice mailboxes. For details, see Mailbox
Builder
on
page 2-62.
Note Mailbox Builder uses station names exactly as programmed on the telephone
system. It is a good idea to program names as you would like to have them on
both systems, whether it is "LASTNAME FIRSTNAME" or "FIRSTNAME
LASTNAME." We recommend using the format "LASTNAME FIRSTNAME."
To assign extension names using attendant telephone:
1.
2.
3.
4.
5.
6.
7.
8.
Press [PROG) #2. You see: ** EXT. NAME **.
Press XXX, whereXXX is the port number of the individual extension.
Press m until you erase the default name.
Using the touchtone keypad, spell the name of the person using the extension. Use
the "LAST FIRST" format. Press the corresponding key the appropriate number of
times for the letter's position on the key. Examples:
For A, press 2; for B, press 22; for C, press 222.
For K, press 55.
For Q, press 1. For Z, press 11. For a space, press [HOLD).
Press (FLASH] after each letter to input the next letter.
Press [HOU3) upon completion.
Repeat steps 2-6 for each extension.
To
assign a terminal type to the voice mail extension ports
1.
2.
3.
Press a,
Dial the voice mail extension port number (DBS CPC-AH range: 9-72) DBS CPC-B
range: 9-144) (DBS CPC-EX 9-144) (DBS 824 range: 3-24). You see: EXT XXX PROGRAM
(SELECT PROGRAM).
Dial 2#. You see: EXT XXX 002: 1 (TEL SET TYPE).
':,
i
I