System Data Default Set; System Programming With A Proprietary Telephone - Panasonic KXTA308 - ANALOG PBX Installation Manual

3 Features
S
ystem Data Default Set
Description
Condition
Programming Reference
Feature References
Operation Reference
S
ystem Programming with a Proprietary Telephone
Description
Conditions
Programming Reference
Feature References
Operation References
This system can re-initialize the system-programmed data. If all the
programmed data is cleared, the system will restart using the
default settings.
• The default setting for each programming item is listed in Section 5.2,
"Default Values".
Section 4, System Programming
[999] System Data Clear
None
Section 2, Installation
2.9 System Data Clear
To program the system, the user needs to connect a KX-TA30830
(Display Proprietary Telephone) to extension JACK 01.
For more information and programming instructions, refer to
Section 4, "System Programming".
• During system programming, the system operates normally.
• During system programming, the extension is regarded as busy.
• To access system administration, a valid password must be entered. The
password is factory-programmed and can be changed.
Section 4, System Programming
[002] System Password
None
Not applicable.
S
Features 3-117