Table of Contents
Advertisement
1.4 VOICE MAIL INTEGRATION
1.4
VOICE MAIL INTEGRATION
1.4.1
General
DPT Integration
To the Panasonic KX-T series PBX that uses DPT Integration, the VPS ports look like digital
extensions. The PBX thinks that the VPS is a digital phone, and the VPS mimics all actions of
a digital set. Another advantage of DPT Integration is that the 2B+D communication provides
2 VPS ports for each Digital Station port. Communication between the VPS and the PBX
through DPT Integration requires the proper software level in the PBX and 4-wire connections
for each port. To communicate between the VPS and the PBX through DPT Integration, the
PBX and VPS must be programmed to work together.
DPT Integration is available when the VPS is connected to a KX-TD/KX-TDA/KX-TAW series
or KX-TA1232 PBX with the proper software level.
Note
To use DPT Integration, the lowest numbered jack of the VPS must be connected to the
lowest numbered jack assigned as a Voice Mail Port Assignment in the PBX. See the
DPT connection example(s) for your VPS model in the following section,
1.4.2 Connection Examples—KX-TVS125,
1.4.3 Connection Examples—KX-TVS225, or
1.4.4 Connection Examples—KX-TVS325.
Connect the other jacks to the VPS in the order of Voice Mail Port Assignment in the PBX.
Inband/None Integration
To the PBX, the VPS looks like SLT sets through standard single-line (tip/ring) telephone
interfaces.
32
Installation Manual
Advertisement
Table of Contents
Troubleshooting
