Replacing The Separation Roller /Lw And The Torque Limiter /Lw - Konica Minolta bizhub C650 Service Manual

Field Service Ver. 2.0 Aug. 2007
[1]
[2]
[4]
5. To reinstall, reverse the order of removal.
2.1.4

Replacing the separation roller /Lw and the torque limiter /Lw

A. Periodically replaced parts/cycle
• Separation roller /Lw: Every 100,000 prints
• Torque limiter /Lw: Every 600,000 prints
B. Replacing procedure
2. Take steps 2 to 4 in the replacement procedure of the separation roller /Up and torque
limiter /Up.
See P.6
3. To reinstall, reverse the order of removal.
[3]
[5]
A07VF2C507DA
[1]
[2]
A07VF2C505DA
2. Periodical check
4. Remove the C-clip [1] and remove
the separation roller /Up [2] and the
torque limiter /Up [3].
NOTE
• Install the separation roller with two
notches [4] face to the front and be
aligned with the prong [5].
1. Pull the release lever [1] and open
the upper door [2].
7