7. Finisher
7.1.4
2 Position Staple Dist. (Only FS-608)
• Adjust the interval between two staples in flat folding and saddle stitching.
1. Place two sheets of originals on the ADF.
2. Make a set of copy in the two position staple mode.
(A)
5. Call the Service Mode to the screen.
See P.434 of the main body service manual.
6. Touch [Finisher].
7. Touch [FS-FN adjustment].
8. Touch [2 Position Staple Dist.].
66
3. Measure the interval (A) between the
4. If A is out of the specification, make
A07RF3C515DA
Field Service Ver. 7.0 Jun. 2008
two staples on the copy.
Specification: 128 mm ± 3 mm
the following adjustment.
A07RF3E560DA
A07RF3E561DA