Tray1 Lift Motor - Konica Minolta bizhub C650 Service Manual

4. Other
4.3.21

Tray1 lift motor

1. Remove the rear cover.
See P.26
[1]
[1]
[2]
[1]
42
[2]
A07RF2C020DA
[2]
[1]
A07RF2C021DA
[1]
[2]
A07RF2C022DA
Field Service Ver. 7.0 Jun. 2008
2. Remove five screws [1] and remove
the reinforcing metal [2].
3. Remove the harness from the three
wire saddles [1] and disconnect two
connectors [2].
4. Remove five screws [1] and remove
the tray 1 lift motor unit [2].
NOTE
• When the tray 1 lift motor unit [2] is
removed, the finishing tray 1 may
fall down. When removing the tray1
lift motor unit, be sure to support
the finishing tray 1 with your hand.