Adjusting The Mounting Position Of The Alignment Plate /Up - Konica Minolta bizhub C650 Service Manual

Field Service Ver. 7.0 Jun. 2008
8.5

Adjusting the mounting position of the alignment plate /Up

• Conduct this adjustment when there is misalignment in the stapled paper bundle.
• Be careful not to let FS fall down when removing FS from the main body
and pulling out the stacker unit from FS. It may cause the injury.
1. Remove the finisher.
See P.31
2. Open the front door.
[1]
[1]
[2]
[3]
CAUTION
3. Pull out the stacker unit [1].
A07RF2C506DA
4. Remove two screws [1] from the rail
NOTE
• Place something [3] on which the
stacker unit can rest.
[1]
A07RF2C507DA
8. Mechanical adjustment
stopper, and then pull out the stacker
unit [2] further.
83