Field Service Ver. 7.0 Jun. 2008
8.7.2
For FS-608
1. Make a copy in the staple mode.
1-point tilted staple
5
A
1-point parallel staple
B
2-point staple
C
2. Check the staple position on the
・ 1-point tilted staple
Specification A: 8.5 ± 3.0 mm
•
1-point parallel staple
Specification B: 8.5 ± 3.0 mm
•
2-point staple
Specification C: 8.5 ± 3.0 mm
3. If the staple position is out of the
A07RF3C550DB
8. Mechanical adjustment
copy is within the specified range.
specified range, make the following
adjustment.
91
5