Konica Minolta bizhub C650 Service Manual page 1190

Field Service Ver. 7.0 Jun. 2008
[3]
[2]
[1]
[4]
A07RF3C552DA
8. Mechanical adjustment
9. Loosen two adjusting screws [1] on
the flat-stapling stopper /Fr and two
adjusting screw [2] on the flat-sta-
pling stopper /Rr, and then adjust the
positions of the flat-stapling stoppers
/Fr and /Rr by referring to the mark-
ings [3] and [4].
10. Make another copy in the staple
mode and check the staple position.
11. Until the staple position is within the
specified range, repeat step 4 to step
10.
93