Fold Power Of Pages Restrict - Konica Minolta bizhub C650 Service Manual

7. Finisher
NOTE
• If mixed originals includes one or more large size ones (A3/11 x 17 or more), the
6
maximum that can be stapled together is subject to the setting of large size sta-
ple limit restriction.
• Large size staple limit restriction is valid only for plain paper.
6 • When the FS-518 is mounted, the maximum of "50" overrides any setting of more
Setting/ than 50 made for the maximum number of sheets (A3/11 x 17 or more) to be sta-
procedure pled together.
• If large size staple limit restriction is set to [-20 pieces] and the maximum num-
ber of sheets to be stapled together less 20 is 2 or less, then the restricted num-
ber of sheets as the maximum is 2.
• If large size staple limit restriction is set to [-20 pieces] with the FS-518 mounted,
the restricted number of sheets as the maximum is 50 even when the maximum
number of sheets to be stapled together less 20 is more than 50.
7.3

fold power of pages restrict.

• Imposes restriction on the number of sheets to be folded in each of different folding
Functions modes.
• This function is available only when FS-608 is installed.
• To change the maximum number of sheets to be folded in each of different folding
Use
modes.
[Center Fold]
• Default setting: "3 Piece".
• Setting range: 1 to 3 Piece
[Center Staple]
• Default setting: "20 Piece".
• Setting range: 2 to 20 Piece
[three fold]
• Default setting: "1 Piece".
• Setting range: 1 to 3 Piece.
[Z fold/staple using togrther], [Z fold]
See P.37 of the ZU-603 service manual.
Setting/
1. Call the Service Mode to the screen.
procedure
2. Touch [Finisher].
3. Touch [fold power of pages restrict.].
4. Select a folding mode where the maximum is restricted and enter a desirable maxi-
mum number with the 10-key pad.
5. Touch [END].
6. Touch [Exit] on the Service Mode screen.
7. Turn OFF the main power switch. then, wait for 10 sec. or more and turn ON the main
power switch.
NOTE
• For [Z fold/staple using together] and [Z fold] modes, their original settings are
not allowed to be changed.
74
6
Field Service Ver. 7.0 Jun. 2008