24
24.3
To change a user data
Follow the procedure below to change a user data (user name and password)
once registered.
!
Detail
Passwords are case sensitive.
If a wrong password or fewer than 8 alphanumerical characters are
entered and the [OK] is touched, the warning message "Password does
not match" will appear, and no key will work for five seconds. Enter the
right password after five seconds.
The current password cannot be used again.
If authentication fails, the information will be saved in the audit log.
1
Press [Utility/Counter] on the control
panel.
The Utility Screen will be displayed.
2
Touch [6 Administrator Setting].
The Input Administrator Password Screen will be displayed.
24-10
User Authentication in Enhanced Security Mode
bizhub PRO 920