Konica Minolta bizhub PRO 920 Operation Manual page 456

17
Specific setting and Description
Org./Out Bind Direction Set
Set the machine to conform the binding direction of the
originals and printed sets each other.
On/Off
Staple Auto Reset
Set the stapling setting On or Off when pressing [Re-
set].
On/Off
Original Set/Bind Direction
Select to reset or save the original direction setting
made on the Special Original Screen and the bind po-
sition setting made on the Output Mode Screen after
completion of each copying job.
Do Not Release/Release Per JOB
Status Hold When Auto Reset
When Auto Reset functions, select to reset the Plat-
en/RADF mode to the initial setting, or save the previ-
ous setting.
Hold/Not Hold
Annotation at JOB completion
Set the machine to automatically select Annotation af-
ter a copying job has been made.
Select/Not Select
Original Glass Auto Copy Reserve
Set the machine to automatically display the Job Re-
serve Screen when the current job has completed
scanning originals from the original glass and started
printing.
On/Off
17-8
Utility <User Setting>
Default
On
Off
Release Per JOB
Not Hold
Not Select
Off
bizhub PRO 920