Konica Minolta bizhub PRO 920 Operation Manual page 63

Preparation for Use
3
Set the hour for the interrupt use, then press [Start].
– Enter a 1-digit hour (ex. 3 for 3 hours) using the control panel
keypad. (0 ~ 9)
Input copy time
3 hour(s)
Press [Start].
4
Set the minute for the interrupt use, then press [Start].
– Enter a 2-digit minute (ex. 07 for 7 minutes) using the control panel
keypad. (00 ~ 59)
Input copy time
3 hour(s)
Press [Start].
Copying is available until the set time is up.
5
When the machine operation is finished, press [Power Save] for one
second or longer, then release it.
The machine returns to OFF condition.
!
Detail
For various settings of the Weekly Timer function, refer to "3 Weekly
Timer Setting>1 Weekly Timer On/Off Setting" on page 18-19.
bizhub PRO 920
05 minute(s)
07 minute(s)
2
2-29