Konica Minolta bizhub PRO 920 Operation Manual page 518

17
5
Touching [Default Density Setting] will display the Default Density
Setting Screen.
Touch [Lighter] or [Darker] to specify the desired density level, or touch
[Auto] for automatic exposure.
Touch [OK] to complete the setting.
6
Touching [Default Scan Size Setting] will display the Default Scan Size
Setting Screen.
Touch the desired size key, or select [Auto] to set the scanning size
automatically.
To set the available scanning area to actual scanning area, touch [Full
Area].
Touch [OK] to complete the setting.
7
If further changes are required, touch the desired key.
Touch [Utility] to restore the Utility Screen.
17-70
Utility <User Setting>
bizhub PRO 920