Tandem Setting>3 Tandem Sub Machine Shift Data Setting - Konica Minolta bizhub PRO 920 Operation Manual

Utility <User Setting>
5 Tandem Setting>3 Tandem Sub Machine Shift Data Setting
Set the sub machine to use the same shift value used on the master machine.
!
Detail
By default, the Tandem Setting key is not displayed. Contact your service
representative.
Note
If the setting 2 Tandem Sub Machine Wait/Proof is set to [Prohibit], the
shift value previously specified for the sub machine cannot be used
because the transmitted image data already reflect the shift value
specified for the master machine.
1
Press the [Utility/Counter] to display the Utility Screen.
2
Touch [2 Function Setting].
The Function Setting Screen will be displayed.
3
Touch [5 Tandem Setting].
The Tandem Setting Screen will be displayed.
bizhub PRO 920
17
17-51