Konica Minolta bizhub PRO 920 Operation Manual page 75

Paper and Original Information
Equipment
Post inserter PI-501
Z folding unit ZU-601
Z folding unit ZU-602
Trimmer unit TU-501
Reminder
Be sure to use paper only of the size specified for the tray, especially
when specified as one of the sizes in Original Size Detection, Custom, or
Wide Paper.
Note
If any size other than A4 (LU-403)/ A3 (LU-404) is desired, contact your
service representative.
Detailed information of paper sizes are:
F4: 203 × 330 mm
A3: 297 × 420 mm
B4: 257 × 364 mm
A4: 210 × 297 mm
B5: 182 × 257 mm
A5: 148 × 210 mm
!
Detail
When setting wide size to the Multi-sheet bypass tray, be sure to specify
the precise dimensions of paper to be used. See "Copying Using Special
Paper (Bypass Tray Setting)" on page 9-16 for details.
bizhub PRO 920
Available sizes
Max. 314 × 460 mm ~ A5
• Upper tray detection size: A4, B5, B5R, 8.5"×11",
8.5"×11"R, 5.5"×8.5"
Detects 8.5"×11"R instead of A4R, 5.5"×8.5" instead of
A5
• Lower tray detection size: A3, B4, A4, B5, B5R,
11"×17", 8.5"×14", 8.5"×11", 8.5"×11"R, 5.5"×8.5"
Detects 8.5"×11"R instead of A4R, 5.5"×8.5" instead of
A5, and 8"×13"/8.12"×13.2"/8.25"×13"/8.5"×13" in-
stead of 8.5"×14.
Punch mode: A3, B4
Z-fold mode: A3 (z-fold), B4 (double-fold)
All other paper sizes will be output without z-fold/double-
fold.
Punch mode: A3, B4, A4, A4R, B5, B5R, A5, A5R
Z-fold mode: A3 (z-fold), B4 (double-fold)
All other paper sizes will be output without z-fold/double-
fold.
A3, B4, A4R, 11"×17", 8.5"×14", 8.5"×11"R and those
wide sizes
3
3-9