Setting Binding Direction For Duplex Copies; To Set Binding Direction For Duplex Copies - Konica Minolta bizhub PRO 920 Operation Manual

Finishing / Paper Fold
12.2

Setting Binding Direction for Duplex Copies

When setting duplex mode (1-2 / 2-2), a binding direction must be selected.
It should be set when making top-bound duplex copies (front and back sides
have the opposite side up) from right&left-bound simplex or duplex originals
(front and back sides have the same side up).
!
Detail
If you want to make right&left-bound duplex copies (front and back sides
have the same side up) from top-bound duplex originals (front and back
sides have the opposite side up), settings for duplex originals and binding
direction are needed. See "Selecting Binding Direction of Originals
(Bind)" on page 10-11 for details.

To set binding direction for duplex copies

0 Top bind for duplex printing functions properly only when duplex mode
is selected.
0 If the machine is reset, the binding mode will go back to R&L bind.
1
Touch [Finishing] on the Basic Screen.
The Finishing setting menu will be displayed.
bizhub PRO 920
12
12-7