Konica Minolta bizhub PRO 920 Operation Manual page 530

18
Specific setting and Description
Finisher Adjust
Make adjustment on Finisher options.
• Fold & Staple Stopper Adjustment
-128 ~ +127 1step=0.1mm
• Half Fold Stopper Adjustment
-128 ~ +127 1step=0.1mm
• Trimming Stopper Adjustment
-128 ~ +127 1step=0.1mm
• Hole-Punch Adjustment
-50 ~ +50 1step=0.1mm
• Z-Fold Position Adjustment
-128 ~ +127 1step=0.1mm
• Letter Fold Adjustment
-128 ~ +127 1step=0.1mm
• 2 Positions Staple Pitch Adjustment
120 ~ 160 1step=1mm
• Fold & Staple Staple Pitch
120 ~ 160 1step=1mm
Timing Adjustment
Make adjustment to control the restart timing.
• Printer Top Margin Adjustment
-30 ~ +30 1step=0.1mm
• Printer Regist Loop Adjust
-10 ~ +10 1step=1mm
-5 ~ +5 1step=1mm
• Printer Pre-Regist
ADU : -10 ~ +10 1step=1mm
Tray 1-4 : -5 ~ +5 1step=1mm
• Lead Edge Margin Selection
-20 ~ +40 1step=0.1mm
• Top Image (Original Glass)
-40 ~ +40 1step=0.1mm
• Top Image (ADF)
-50 ~ +50 1step=0.1mm
• Scanner (ADF) Regist Loop Adjust
-10 ~ +10 1step=0.5mm
Centring Adjustment
Make adjustment to control the centring
• Printer Left Margin
-64 ~ +63 1step=0.1mm
• Scanner (Orig. Glass) Left Image
-30 ~ +30 1step=0.1mm
• Scanner (ADF) Left Image
-30 ~ +30 1step=0.1mm
7 Size Setting
Original Size Detect
Set the detected paper type of the original.
Metric/Inch/Metric A Size Paper/Full Size
Orig. Glass Orig. Size Detect (Small)
Set the smallest size when copying by placing the orig-
inal on the original glass.
A5R/5.5×8.5/B5/A4/8.5×11
18-8
Utility <Administrator Setting>
Default
- - -
- - -
- - -
Metric A Size Paper
A5R
bizhub PRO 920