Change Size Setting - Konica Minolta bizhub PRO 920 Operation Manual

15
15.3

Change Size Setting

Use this function to change paper settings according to a specified paper
type.
!
Detail
To change the paper size of the Tray 4 (Large Capacity Unit), contact your
service representative.
When setting wide size, be sure to specify the precise dimensions of
paper to be used.
Service can set the machine to display the Tray Setting key on the Utility
Screen. Contact your service representative, if desired.
1
Press the [Utility/Counter] on the
control panel.
The Utility Screen will be displayed.
2
Touch [6 Administrator Setting].
The Password Input Screen will be displayed.
When the Password Input Screen is not displayed, proceed to step 4.
15-12
Paper Setting
bizhub PRO 920