List Of Ip Nic Setting - Konica Minolta bizhub PRO 920 Operation Manual

Utility <Administrator Setting>

List of IP NIC Setting

Specify the controller settings. Various default settings or network settings
can be customized as required.
List of the Network Settings
Specify the settings for connecting a network printer and network scanner,
and the settings for TCP/IP, RAW port numbers, IP Filter (permission/denial),
and ping.For details, refer to page 18-122.
Specific setting and Description
1 TCP/IP
TCP/IP
Specify enable or disable TCP/IP.
Enable/Disable
DHCP
Specify enable or disable Dynamic Host Configuration
Protocol (DHCP). If [Enable] is selected, the IP address is
automatically obtained from the DHCP server, in which
case it is not necessary to enter it.
Enable/Disable
IP Address
Specify the IP address.
0.0.0.0 (0 - 255)
Subnet Mask
Specify the subnet mask.
0.0.0.0 (0 - 255)
Address Gateway
Specify as required.
0.0.0.0 (0 - 255)
DNS Server1 to 3
Specify DNS server addresses.
0.0.0.0 (0 - 255)
DNS Host Name
Specify the DNS host name.
**********
Varied from machine to machine.
Max. 63 characters combining symbols and alphanumer-
ics can be used.
DNS Domain Name
Specify the DNS domain name.
Max. 63 characters combining symbols and alphanumer-
ics can be used.
LPD
When [Enable] is selected, LPD/LPR printing becomes
available.
Enable/Disable
Line Speed Network
Specify the network transfer rate.
Auto Negotiation/10M Half Duplex/10M Full Duplex/100M
Half Duplex/100M Full Duplex
bizhub PRO 920
18
Default
Enable
Disable
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
- - -
- - -
Enable
Auto Negotiation
18-107