To Change/Delete User (Section) Access Numbers - Konica Minolta Di1611 Advanced Information

Utility Mode – Copy Functions

To change/delete user (section) access numbers

1
Select the "ADMIN.
MANAGEMENT" menu.
Refer to "To select the "ADMIN.
MANAGEMENT" menu" on
page 7-23.
2
Press the [2] key from the 10-Key Pad to select "COPY TRACK".
3
Using the 10-Key Pad, enter the 6-
digit administrator access number,
and then press the [Yes] key.
The "COPY TRACK" appears.
4
Using the
"ACCESS NO. REG.?", and then
press the [Yes] key.
5
Using the 10-Key Pad, enter the
access number that you wish to
change/delete, and then press the
[Yes] key.
Enter a 3-digit access number.
If you wish to correct the access
number, press the [No] key, and then enter the new number.
A confirmation message appears, asking whether or not to keep the
registered access number.
6
To change/delete the access
number, press the [No] key.
To keep the currently registered
access number, press the [Yes]
key.
Di1611/Di2011
and keys, select
7
7-29