Konica Minolta bizhub PRO 920 Operation Manual page 23

Precautions for Installation and Use
Power source
• Consult your authorized service representative before con-
necting other equipment on the same wall outlet. Overload
could result in a fire.
CAUTION
• The outlet must be near the equipment and easily accessible.
Otherwise you can not pull out the power plug when an emer-
gency occurs.
Power plug
WARNING
• Do not unplug and plug in the power cord with a wet hand,
as an electrical shock could result.
• Plug the power cord all the way into the power outlet. Failure
to do this could result in a fire or electrical shock.
CAUTION
• Do not tug the power cord when unplugging. Pulling on the
power cord could damage the cord, resulting in a fire or elec-
trical shock.
• Remove the power plug from the outlet more than one time a
year and clean the area between the plug terminals. Dust that
accumulates between the plug terminals may cause a fire.
Grounding
WARNING
• Connect the power cord to an electrical outlet that is
equipped with a grounding terminal.
bizhub PRO 920
1
1-5