Konica Minolta bizhub PRO 920 Operation Manual page 498

17
4
Touch [2 Tandem Sub Machine Wait/Proof].
The Tandem Sub Machine Wait/Proof Screen will be displayed.
5
Touch [Permit] or [Prohibit] to highlight it.
– With [Permit] selected, the master machine transmits the image
data to sub machine and a proof copy will be made on both master
and sub machines.
– With [Prohibit] selected, a proof copy can be made on the master
machine only. Sub machine will receive the image data normally at
the time when printing job starts.
6
Touch [OK] to complete the setting and return to the Tandem Setting
Screen.
7
If further changes are required, touch the desired key.
Touch [Utility] to restore the Utility Screen.
17-50
Utility <User Setting>
bizhub PRO 920