Konica Minolta bizhub PRO 920 Operation Manual page 448

16
– Use the control panel keypad to enter the time, then touch [Set].
The available range is from 10 to 300. When the time outside this
range is entered as touching Set, the time initially entered is
designated.
If the wrong number is entered before touching [Set], touch [Reset]
to re-enter the correct number.
5
Touch [Return]. The Controller Setting Screen will be restored.
6
If further changes are required, touch the desired key.
Touch the [Utility] to complete the setting and restore the Utility Screen.
16-22
Controller Setting
bizhub PRO 920