Konica Minolta bizhub PRO 920 Operation Manual page 261

Applications
7
Position originals FACE UP in the document feeder or FACE DOWN on
the original glass.
– If the number of document feeder originals exceeds 100, divide
them into blocks not exceeding 100 sheets and load them from the
block with the first page.
8
Press [Start].
When scanning for the current JOB is competed, the popup menu will
be displayed in the Basic Screen.
9
Touch [Fix].
The current JOB images will be stored.
The paper size determined at this time will be applied to all subsequent
JOBs.
? Do you want to delete the images?
% Touch [Cancel].
10
Repeat steps 6 to 9 until all JOB originals are scanned.
– Place and scan each original set in the correct order of pagination.
11
Touch [Separate Scan] to deselect it and exit the Separate Scan mode.
12
Select the desired Finishing mode and enter the print quantity from the
control panel keypad.
13
Press [Start].
bizhub PRO 920
11
11-27