Konica Minolta bizhub PRO 920 Operation Manual page 642

18
Specific setting and Description
Domain Name
Specify a domain name.
This setting is required if GSS-SPNEGO is selected
as the authentication type.
Max. 64 characters combining symbols and alphanu-
merics can be used.
Dynamic Authentication
Set the Dynamic authentication.
Enable/Disable
Specify the SNMP Trap setting. For details, refer to page 18-175.
Specific setting and Description
16 SNMP Trap
SNMP Trap Transmission
Specify to transmit SNMP Trap or not.
On/Off
Authentication Failure Trans
Specify to transmit by SNMP in the case that any authen-
tication failure in Read Community Name or Write Com-
munity Name of SNMP occurs.
On/Off
Trans Address 1 - 5 Setting
Address SNMP Trap Trans
Specify to transmit the SNMP Trap or not.
On/Off
SNMP Trap Trans Address
Specify the SNMP Trap transmission address.
1 - 255
SNMP Trap Trans Port No.
Specify the SNMP Trap transmission port number.
1 - 65535
Trans Community Name
Specify the transmission community name.
Max. 15 alphanumerics/symbols can be used.
Report Items
Select the desired items. (More than one item can be
selected.)
8 items
Service Call/Jam/Paper Supply/Toner Supply/PM
Call/Staple Cartridge Supply/Finisher Tray Full/Dis-
pose of Trash Basket
Clear All
18-120
Utility <Administrator Setting>
Default
- - -
Disable
Default
Off
Off
Off
0.0.0.0
162
public
- - -
bizhub PRO 920