Weekly Timer Setting - Konica Minolta bizhub PRO 920 Operation Manual

18

3 Weekly Timer Setting

This function can be accessed only by the Administrator.
- The Weekly Timer is a machine management function that shuts down
power to the machine on a daily or hourly basis, and can be programmed
specifically for lunch breaks, weekends and holidays, or any time the
copier is not required.
- In addition, Timer Interrupt can be enabled (with or without a password
requirement) to allow temporary use of the machine during periods when
power is shut down by the Timer function.
If the Weekly Timer needs to be activated on your machine, contact your
service representative.
Conditions required to use the Weekly Timer
- The power plug is inserted into the socket.
- The power switch is turned on.
- The current date and time are correctly set.
18-18
Utility <Administrator Setting>
bizhub PRO 920