Konica Minolta bizhub PRO 920 Operation Manual page 566

18
6
Select the condition for erasing a non image area.
– Touch [Auto Erase].
– Select to highlight the desired condition.
7
Touch [Mode Set] to select the erase mode and the original density.
– Touch [Oblique Erase] or [Rectangle Erase] to select the erase
mode.
– Touch [Lighter] or [Darker] to set the density level (five levels).
Touch [Std.] to set the standard density.
8
Touch [OK] to return to the Expert Adjustment Screen.
9
If further changes are required, touch the desired key.
Touch [Utility] to restore the Utility Screen.
18-44
Utility <Administrator Setting>
bizhub PRO 920