Interrupt Copying; To Use Interrupt Mode - Konica Minolta bizhub PRO 920 Operation Manual

Advanced Information
14.3

Interrupt Copying

Use the Interrupt mode to interrupt copying in progress to perform a simple
job. When interrupt copying is completed, the settings for the previous job
restore automatically and the Basic Screen displays.

To use Interrupt mode

0 The Interrupt mode cannot be selected with the following conditions:
Machine is not operating printing or scanning job.
Program Image Overlay is in use.
The Call for Service message displays or a paper misfeed occurs.
Already using Interrupt mode.
0 Reserve job cannot be operated in Interrupt mode.
0 Low Power or Sleep will not function during Interrupt mode.
1
Press [Interrupt] on the control panel.
The Interrupt LED starts flashing,
then keeps lighted when machine is
ready for Interrupt mode.
The Basic Screen for Interrupt
copying will be displayed.
2
Set copy conditions, as desired.
– All copy conditions except Reserve mode can be specified.
3
Position original(s), then press [Start] to start the interrupt copying.
4
When Interrupt copying is completed, press [Interrupt] again.
bizhub PRO 920
14
14-9