To Stop Scanning/Printing; To Cancel The Tandem Copying Job - Konica Minolta bizhub PRO 920 Operation Manual

Finishing / Paper Fold

To Stop Scanning/Printing

To cancel the tandem copying job

1
Press [Stop] on the control panel of the master machine.
The scanning/printing job stops immediately, and the popup menu
appears on the Basic Screen of the master machine to ask you whether
to continue or terminate the job. At this time, the tandem mode is not
yet released.
2
Touch [Stop Job] to delete all the scanned data and to release the
tandem mode.
However, if the data transmission has already been completed, the
tandem job on the tandem machine has to be cancelled separately.
Touch [Job List] on the touch panel of the tandem machine to display
the Job List Screen, then delete the tandem job.
To stop the job cancelling procedure, touch [Continue] on the popup
menu.
bizhub PRO 920
12
12-39