Ozone Release; Electromagnetic Interference; For European Users; For German Users - Konica Minolta bizhub PRO 920 Operation Manual

Hide thumbs Also See for bizhub PRO 920:
Table of Contents

Advertisement

1

Ozone Release

During print operation, a small quantity of ozone is released. This amount is
not large enough to harm anyone adversely. However, be sure the room
where the machine is being used has adequate ventilation, especially if you
are printing a high volume of materials, or if the machine is being used
continuously over a long period.

Electromagnetic Interference

This product must be used with a shielded network cable and shielded USB
interface cable.
The use of non-shield cables is likely to result in interference with radio
communications and is prohibited under CISPR 22 and local rules.

For European Users

This product complies with the following EU directives:
89/336/EEC, 73/23/EEC and 93/68/EEC
This declaration is valid for the areas of the European Union (EU) or EFTA
only.
This device must be used with a shielded network cable and shielded USB
interface cable. The use of non-shielded cables is likely to result in
interference with radio communications and is prohibited under 89/336/EEC
rules.

For German Users

Maschinenlärminformations -Verordnung - 3. GSGV, 18.01.1991:
1-10
Precautions for Installation and Use
bizhub PRO 920

Advertisement

Table of Contents
loading

Table of Contents