Konica Minolta bizhub PRO 920 Operation Manual page 286

11
!
Detail
Creep function is available only when Booklet Pagination (except
Adhesive Binding mode) has been already selected.
Use this function in combination with Page Interval to make space
between the two images widening gradually from the inner pages to the
outer pages in a folded/folded&stapled and trimmed booklet, so that the
outer margin should be uniform on all pages through.
Enter the creep amount of the images on the outermost page, while
entering the page interval amount of the images on the innermost page.
11-52
Centre
Creep Creep
Applications
Centre
Page interval
bizhub PRO 920