Konica Minolta bizhub PRO 920 Operation Manual page 105

Supplies & Handling
4.6 Empty Waste Basket of Punch Kit PK-504/505
Punch kit PK-504/505 is installed in Finisher FS-509/FS-604.
If the waste basket of the punch kit becomes full, "Waste basket of Punch kit
is full / Please empty waste basket" message will be displayed on the touch
panel, and the finished set will be output without being punched even if
Punch mode has been specified.
Before setting punch mode, be sure to check the waste paper inside the
waste basket, and empty the waste basket if needed.
To empty waste basket
1
Open the Finisher door.
2
Withdraw the waste basket.
bizhub PRO 920
4
4-25