Description Of User Authentication - Konica Minolta bizhub PRO 920 Operation Manual

User Authentication in Enhanced Security Mode
24 User Authentication in Enhanced
Security Mode
24.1

Description of user authentication

In Enhanced Security mode, setting up password conditions will be tougher
to improve security. The administrator should set up a user name and
password required for user authentication, as this is an administrator
operation.
User Name: 1 to 64 alphanumerical characters
Password: 8 to 64 alphanumerical characters (case sensitive)
If a wrong password is entered, attempts to re-try cannot be made for five
seconds.
Reminder
Do not use your name, birthday, employee number, etc. for a password
that others can easily figure out.
If a password set in normal mode is fewer than 8 characters or more than 64
characters, you cannot use it in Enhanced Security mode.
If this happens, contact the administrator to turn OFF Enhanced Security
mode, and set a new password following the above conditions.
Even after a successful access has been made, authentication with user
name and password will be required under the following conditions.
- The main power switch is turned off.
- The sub power switch is turned off.
- The [Access] on the control panel is pressed.
- The [Copy]/[Scan]/[Box] on the control panel is pressed, when the
User/Account Authentication Connect is turned on.
- The [Job List] on the touch panel is touched, when the User/Account
Authentication Connect is turned on.
- The auto reset function operates.
bizhub PRO 920
24
24-3