Expert Adjustment>Centring Adjustment - Konica Minolta bizhub PRO 920 Operation Manual

18
6 Expert Adjustment>Centring Adjustment
!
Detail
By default, the Centring Adjustment key is not displayed. Contact your
service representative.
Use this function to set the following items for centring adjustment to the
direction of paper feed.
Printer Left Margin
-
Adjust to control image centring to the direction of paper feed.
Available range: -64 (forward) to +63 (backward), 1 step = 0.1mm
- Scanner (Orig. Glass) Left Image
Adjust to control scanned image centring with the original glass.
Available range: -30 (forward) to +30 (backward), 1 step = 0.1mm
- Scanner (ADF) Left Image
Adjust to control image centring with ADF.
Available range: -30 (forward) to +30 (backward), 1 step = 0.1mm
1
Press the [Utility/Counter] to display the Utility Screen.
2
Touch [6 Administrator Setting], enter the administrator password, and
then touch [OK].
The Administrator Setting Screen will be displayed.
3
Touch [1 System Setting].
The System Setting Screen will be displayed.
18-54
Utility <Administrator Setting>
bizhub PRO 920