Output Z-Folded Copies (Z-Fold); To Make Z-Folded Copies - Konica Minolta bizhub PRO 920 Operation Manual

Finishing / Paper Fold
12.7

Output Z-Folded Copies (Z-Fold)

The Finisher FS-509/FS-604 with Z folding unit ZU-601/602 installed can
zigzag fold A3 or B4 copy paper upon exit.
This mode is available in combination with Punch or Staple mode.

To make Z-folded copies

0 Number of folded sheet: 1 sheet
0 Paper size: A3, B4, 11"×17", 8.5"×14"
0 Paper weight: 60 to 90 g/m
0 Fold type: Z-fold (double-fold 8.5"×14" only)
0 Fold position (width from the edge to the first fold):
A3: 209 mm or less
B4: 181 mm or less
11"×17": 215 mm or less
8.5"×14": 261.6 mm or less
0 Z-Fold and Staple modes are available in combination for A3 and A4
mixed, while they cannot be used for B4 and B5 mixed.
0 When using Mixed Original mode with Z-Fold mode, different types (e.g.
A3 and B4) should not be mixed, otherwise the Z-Fold mode may not
function properly.
0 Some plain paper types may cause fold line to shift.
0 Copy paper cannot be fed from trays specified as Thick 2, OHP, or
Tracing in paper type, or specified as any size other than Standard.
(Unavailable for the sizes in Original Size Detection, Custom, Wide Size
or Tab Paper)
bizhub PRO 920
Z-Fold
Z-Fold + Staple + Mixed Original
2
12
Z-Fold + Punch
12-23