Konica Minolta bizhub PRO 920 Operation Manual page 533

Utility <Administrator Setting>
Specific setting and Description
5 Copier/Printer Setting
JOB Offset Mode
Set the machine to offset the copies/printouts of different
jobs.
On/Off
Continuous Print (Print)
Set the machine to output multiple reserve jobs in succes-
sion.
On/Off
Change Page Number print Pos. (Booklet)
Set the page number position when using Booklet with
Page Numbering in Stamp.
On (Outside Page Print)/Off
Fixing Prerotation Set
The fixing heat adjustment may be necessary as altering
the paper type and the weight. The machine rotates the fix-
ing roller before printing starts, in order to print at the ap-
propriate temperature for the specific paper type and the
weight.
On/Off
Auto Image Rotation
When the trays contain only the paper size different from
the original, rotate the image of the original and adjust to fit
into the copying paper size
On - Always/On - APS/AMS Only/On - APS/AMS/Reduce
Only
Suspend Interruption
Set the timing to interrupt the present job when pressing
[Interrupt] while copying.
When Current Set Complete/Stop Immediately
Reserve Copy Function
Set the timing for the reserve job either by setting on the
Copy Reserve Confirmation Screen, or by placing the orig-
inal on the original glass.
Enabled by Operation/Enabled by Set Original
Suspend Scanning When Tray is pulled
Set to stop scanning when pulling out the tray.
On/Off
Continuous Print(Copy)
Set the machine to output multiple reserve jobs in succes-
sion
On/Off
Face Up/Down for 1 sheet
Set the exit direction when copying one set of the original
on the original glass.
Face Up/Face Down
Single Feed Auto Setting
On/Off
bizhub PRO 920
Default
Off
Off
Off
On
On - APS/AMS Only
Stop Immediately
Enabled by Operation
On
Off
Face Down
Off
18-11
18