Konica Minolta bizhub PRO 920 Operation Manual page 502

17
5
Touch [On] or [Off] to highlight it.
– With [On] selected, the two machines will continue to work in
tandem after completion of the tandem job.
– With [Off] selected, the tandem mode will be released after
completion of the tandem job.
6
Touch [OK] to complete the setting and return to the Tandem Setting
Screen.
7
If further changes are required, touch the desired key.
Touch [Utility] to restore the Utility Screen.
17-54
Utility <User Setting>
bizhub PRO 920