To Use Finisher Manually - Konica Minolta bizhub PRO 920 Operation Manual

Finishing / Paper Fold

To use finisher manually

0 Paper should be placed only in the lower tray of the post inserter. Upper
tray cannot be used.
0 Staple (1 staple / 2 staples) and Punch can be used in combination.
0 Specifications for Staple (1 staple / 2 staples)
Paper size: A3, B4, A4, A4R, B5, A5, 11"×17", 8.5"×14", 8.5"×11",
8.5"×11"R (50 to 200 g/m
Staple capacity: FS-604; 50 sheets or less
FS.509; 50 sheets or less (A3, 11"×17") / 100 sheets or less (B4 to
8.5"×11"R)
Output tray: Primary (main) tray
0 Specifications for Punch
Paper size: A3 to A5 (50 to 170 g/m
Tray capacity: 200 sheets or within 30 mm thick
Output tray: Primary (main) tray
0 Specifications for Fold&Staple
Paper size: A3, B4, A4R, 11"×17", 8.5"×14", 8.5"×11"R (60 to 200 g/m
Fold&Staple capacity: 20 sheets or less (80 g/m
less (80 g/m
Output tray: Folding mode tray
0 Specifications for Letter Fold
Paper size: A4R, 8.5"×11"R (60 to 80 g/m
Fold capacity: 3 sheets or less
Output tray: Folding mode tray
1
Place a set of paper in the lower tray
of the post inserter.
– Staple (1 staple / 2 staples): Place
paper face UP.
– Punch: Place paper face UP.
– Fold&Staple: Place the front of
the finished set UP.
– Letter Fold: Place the outside of
the fold UP.
– Align the guide plate with the
paper.
bizhub PRO 920
2
)
2
paper) with a thick cover paper
2
)
2
paper) / 19 sheets or
2
)
Lower tray
12
2
)
12-31