Konica Minolta bizhub PRO 920 Operation Manual page 496

17
5
Touch [On] or [Off] to highlight it.
– With [On] selected, the master machine immediately starts printing
with scanning on the run, while the sub machine waits for all the
data to be transmitted then starts printing.
– With [Off] selected, printing job starts on both master and sub
machines while the master machine continues scanning the
originals.
6
Touch [OK] to complete the setting and return to the Tandem Setting
Screen.
7
If further changes are required, touch the desired key.
Touch [Utility] to restore the Utility Screen.
17-48
Utility <User Setting>
bizhub PRO 920