Change Tray Setting - Konica Minolta bizhub PRO 920 Operation Manual

Paper Setting
15.2

Change Tray Setting

Set this function especially when special paper is used on a regular basis and
is always placed in a specific paper tray.
!
Detail
Service can set the machine to display the Tray Setting and PI Setting
keys on the Utility Screen. In this case, the Paper Setting key on the
System Setting Screen will be grayed out to show inactivity. Contact your
service representative, if desired.
For the details of how to set the paper size of an upper/lower tray for PI,
see "8 Paper Setting>2 PI Setting" on page 18-60.
See "Paper Type and Weight" on page 15-5 for details of the paper
types.
1
Press the [Utility/Counter] on the
control panel.The Utility Screen will
be displayed.
2
Touch [6 Administrator Setting].
The Password Input Screen will be displayed.
When the Password Input Screen is not displayed, proceed to step 4.
bizhub PRO 920
15
15-7