Applications
Do you want to cancel the "Non-Image Area Erase" function?
?
% Touch [Non-Image Area Erase] again.
4
Touch [OK] to restore the Application Screen.
5
Enter the desired print quantity, position original, then press [Start].
Reminder
Do not close the document feeder while scanning the original.
!
Detail
The Non-Image Area Erase has two modes; Rectangle erase mode and
Oblique erase mode. The machine is initially set to select the either mode
appropriate for the original placed on the original glass (AUTO mode).
If desired, display the Utility Screen to specify either mode and the
original density level manually so that the Non-Image Area Erase
functions without fail.
bizhub PRO 920
Oblique erase mode
Rectangle erase mode
11
11-61