Konica Minolta bizhub PRO 920 Operation Manual page 189

Basic Job Settings
7
Touch [OK] to restore the Paper setting menu.
The specified paper condition will be displayed on the bypass tray key.
8
Touch [OK] on the Paper setting menu.
The Basic Screen will be restored.
Do you want to start copying immediately?
?
% You don't have to touch [OK] to restore the Basic Screen. Position
original(s) directly, then press [Start].
9
Select additional copy conditions, as required.
"Auto" will be displayed on the Zoom key to show its activity.
10
Position original(s), then press [Start].
!
Detail
For details of Auto Zoom function, see "To Specify Desired Paper Size
(Auto Zoom)" on page 9-14.
To copy the original of the same size as that specified in the Original Size
Detection setting, Original Size Setting is also required. See "Copying
Non-Standard Size Originals (Custom Size / Tab Paper)" on page 10-21
for details.
To copy the image on the tab part of the original onto the tabbed copy
paper, Original Size Setting is also required. See page 10-21 for details.
To copy onto OHP transparencies, Application setting is required. See
"Copying onto Transparent Films (OHP Interleave)" on page 11-22 for
details.
bizhub PRO 920
9
9-23