Konica Minolta bizhub PRO 920 Operation Manual page 390

14
3
Check the job settings on the screen.
– Touch the arrow keys to scroll pages.
If Bookmark has been checked on any subsequent screen of
Application function, the Check Screen for that function will be
displayed first.
– To make any setting change from the Check Screen, proceed to the
next step.
– To release any application function from the Check Screen,
proceed to step 5.
– If a sample copy is needed, proceed to step 6.
– If settings are OK, proceed to step 8.
4
Change the settings from the Check Screen.
– Touch the desired key (Basic/ Combine Originals/ Finishing/ Paper
Fold/ Org. Image Type/ each application function) on the Check
Screen to highlight it, then touch [Change]. The touch panel will
display an appropriate screen to change the copying condition
selected.
– Change the setting as desired, then press [Check] to restore the
Check Screen to return to the checking steps.
– If making a set or sample copy, proceed to step 6.
– To start printing without proofcopying, proceed to step 8.
14-6
Advanced Information
bizhub PRO 920