Spool - Konica Minolta bizhub PRO 920 Operation Manual

16
16.5

04 Spool

Select to enable, disable, or automatically perform the spool function.
1
Press the [Utility/Counter] to display the Utility Screen.
2
Touch [Controller].
The Controller Setting Screen will be displayed.
3
Touch [04 Spool].
The Spool Selection Screen will be displayed.
4
Touch the desired key to select it.
5
Touch [OK] to complete the setting. The Controller Setting Screen will
be restored.
6
If further changes are required, touch the desired key.
Touch [Utility] to complete the setting and restore the Utility Screen.
16-20
Controller Setting
bizhub PRO 920