Tandem Setting>4Tandem Selection After Job Completion - Konica Minolta bizhub PRO 920 Operation Manual

Utility <User Setting>
5 Tandem Setting>4Tandem Selection after JOB Completion
Select to continue or release the tandem mode after the current tandem job
is completed.
!
Detail
By default, the Tandem Setting key is not displayed. Contact your service
representative.
1
Press the [Utility/Counter] to display the Utility Screen.
2
Touch [2 Function Setting].
The Function Setting Screen will be displayed.
3
Touch [5 Tandem Setting].
The Tandem Setting Screen will be displayed.
4
Touch [4 Tandem Selection after JOB completion].
The Tandem Selection after Job Completion Screen will be displayed.
bizhub PRO 920
17
17-53