Konica Minolta bizhub PRO 920 Operation Manual page 489

Utility <User Setting>
8
Touch [User Density] on the Basic Screen to restore the Set User
Preset Density Level Screen.
9
Repeat step 6 to 8 when outputting more than one sample sheet for
each level.
10
Check the sample sheet and enter the desired density level using the
control panel keypad.
The number entered will be displayed in the box above Set Density.
– To output the sample sheet of the specified density level, touch [Set
Density] then touch the [Copy]. Place the original on the original
glass, and press the [Start] on the control panel.
11
Touch [OK] to complete the setting and return to the User Density
Setting Screen.
12
If further changes are required, touch the desired key.
Touch [Utility] to restore the Utility Screen.
bizhub PRO 920
17
17-41