Konica Minolta bizhub PRO 920 Operation Manual page 426

15
– Touch [Input Size] to set the desired size.
– Touch [X], [Y], or [Z], indicating the vertical, horizontal or index size,
then enter the desired size using the control panel keypad.
– The value to be specified for X and Y will be the minimum size of
140×182mm to the maximum size of 314×445mm. The value to be
specified for Z will be 0 to 99mm.
– Touch [Select Size] to return to the Select Size Screen.
Touch [OK] to complete the setting and return to the Tray Setting
Screen.
15-18
Paper Setting
bizhub PRO 920