Print Tab; Port Settings - Konica Minolta bizhub PRO 920 Operation Manual

20

20.4.2 Print Tab

The [Print] tab is used to configure the image controller.
Interface
This screen appears when you click [Interface] on the [Print] tab. The screen
is used to set information concerning the interface timeout.
Description
- Parallel Timeout: Set parallel port timeout (10-300 seconds).
- Network Timeout: Set receive network timeout (10-300 seconds).
- [Apply] button: Click the button to apply the new settings.
- [Clear] button: Click the button to clear the settings that were entered.

Port Settings

This screen appears when you click [Port Settings] on the [Print] tab. You can
use the screen to see the list of port settings.
Description
- RAW port number
List the RAW port numbers 1 to 6 that are set in [TCP/IP] on the [Network]
tab.
- Status
Show enable or disable of each RAW port.
20-18
PageScope Web Connection Setting
bizhub PRO 920